Rubberizeit Support

   ? 1. Applied Too Thick     •    Issue: If Dura-Rubber is applied in thick coats instead of multiple thin layers, the surface can skin over and dry fas...

  Coating is on too thin. This sample is about 5 mil it needs to be a minimum of 20 mil for underwater applications. This has pin holes water gets beh...

This is an example of not using reinforcement fabric in corners and seams. Solution:  See how to install fabric

This is what happens if you try to thin the Dura-Rubber with water. Solution: Do not thin with water thin with Propylene Glycol.  

This is when water gets on the coating before it is dry. Solution: Wipe down with a rag and re-apply when it is dry.

Bubbles or blisters in your Dura-Rubber pool coating typically form due to one or more of the following reasons: 1. Surface Contamination     •    O...

Peeling is caused by one of a few things.  For Dura-Rubber, peeling can occur due to specific factors related to its application and environment. ...

Surfactant leaching? “Surfactant leaching” is best described as soapy, sticky or oily spots or perhaps glossy streaks that appear on newly painted surfa...